From film to the print

for those who’ve worked in a photographic darkroom, this is nothing new.

It’s important to understand, that when I state the print type, my goal is to distinguish the type of process that I’m using to create the print. In basic terms, unless I state that it is a digital print, all of my photo’s are done using what is considered a historic or an alternative processes, which done by hand, and often in a darkroom –

daylight developing tank

For this example, I’m using a photo from a roll of film, which I hand developed using conventional D76 developer. This is done using what is commonly called a daylight tank, the tank pictured is for 35mm roll film. To use the style of the tank shown. While in complete darkness, I open the film cartridge, then thread the film onto the spool for the tank, once this is done, the spool is placed in the tank. which is then closed allowing one to keep the film in darkness, but develop in the light.

After the film has been developed, fixed, rinsed and dried, it’s cut up into sections, then typically a proof sheet is made using contact printing frame and an enlarger, in the darkroom.

contact proof sheet

Proof sheets are a great tool, allowing the photographer to selectively choose what images to print as well as providing information, used to print the photo.  using the photo of the cannon firing, you’ll note that it’s the only photo on the roll that shows a cannon being fired.  – to capture the photo, it’s a matter of timing, unlike a DSLR, where the modern photographer will often lay on the shutter, capturing 20 different shots in a fraction of a second.

35mm cannon

Taking a closer look at the photo, I felt this image had a lot of neat aspects while providing me with a lot of room to adjust and change the photo, capturing different feelings and emotions. While these modifications can be done digitally, I feel that the digital modification loses the personal touch, a warmth that says that this image was created by hand.

taking the negative, I printed about half a dozen variations, simply to find and create an impression that I felt striking, I also decided to use fiber based non-glossy paper, with some prefecta-d developer, creating hard blacks, with a lot of contrast allowing the image to become ingrained into fibers of the paper, creating depth, I also cropped the photo as I enlarged changing the framing, this again was done in my darkroom. finally, I used a selenium toner to bring some warmth to the image while also helping prevent the silver from darkening.

The step final was choosing a frame, mat, and mounting the image, again I used the frame and mat to help accentuate the picture, while the glass created another layer of depth.


This version of the image wasn’t framed, if you note the border was actually too larger fit nicely under the precut mat, so once again back to the darkroom to print a version without the border.

The final version an  11″ x 14″ print, which is presently displayed at the Churchill county offices is for sale



Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s